Micro Miniature Coaxial Switches 26.5 GHz
RLC Electronics’ Micro Miniature Coaxial Switch is a single pole two position type. The switch incorporates SMP “push on” connectors to allow high density packaging and excellent electrical performance through 26.5 GHz.A pin configuration is also available. The switch is available in failsafe and Pulse latching configurations with a choice of three different frequency ranges and three different coil voltages.
Specifications
SR-2-MIN-MIN-G–1–2–3
Switch Type |
Single Pole Two Position |
|||
Frequency (GHz) |
DC-8 |
8-12.4 |
12.4-18 |
18-26.5 |
Insertion Loss (dB Max.) |
0.3 |
0.4 |
0.7 |
0.8 |
VSWR (Max.) |
1.35 |
1.5 |
1.7 |
1.8 |
Isolation (dB Min.) |
70 |
60 |
60 |
50 |
Power Rating RF Cold Switching: See this page Impedance: 50 Ohms Operating Power 25C (mA nominal): 5 Vdc at 310mA, 310mA, 12 Vdc at 130mA and 28 Vdc at 75mA RF Connectors: SMP male full detent Power Connections: 0.018 dia. pins |
Life: 1,000,000 operations Switching Time: 15 milliseconds max. Weight: 1 oz. Environmental Conditions: MIL-DTL-3928 Operating Mode: Failsafe or Pulse Latching Switching Sequence: Break before make |
To designate the switch desired use:
1: “E” for 5 volt coil, “H” for 12-15 volt coil, “D” for 24-28 volt coil 2: “8” for DC-8 GHz, “18” for DC-18 GHz, “26” for DC-26.5 GHz |
3: “A” for failsafe (Figure 1), “B” for failsafe (Figure 2), “L” for Pulse Latching |
Example: SR-2 min-min-G-D-26-L is SPDT, 24-28 Vdc, DC 26.5 GHz, Pulse Latching Switch
Outline Drawing
