High Power Multi-Position Coaxial Switches
RLC Electronics’ High Power Multi-Position Coaxial Switch line provides extremely high reliability, long life and outstanding electrical performance and features extremely low insertion loss and VSWR over the entire DC-6GHz range, while maintaining high isolation.
Specifications
S–1–2–P–3–4–5–6–7
RF Positions |
3 |
4 |
5 |
6 |
Switch Type: |
SP-3T |
SP-4T |
SP-5T |
SP-6T |
Frequency Range:(GHz) |
DC-6 |
DC-6 |
DC-6 |
DC-6 |
Insertion Loss (Max dB) DC-1 GHz 1.0-3.0 GHz 3.0-6.0 GHz |
0.15 0.35 0.50 |
0.15 0.35 0.50 |
0.15 0.35 0.50 |
0.15 0.35 0.50 |
VSWR (Max) DC-1 GHz 1.0-3.0 GHz 3.0-6.0 GHz |
1.15 1.35 1.50 |
1.15 1.35 1.50 |
1.15 1.35 1.50 |
1.15 1.35 1.50 |
Isolation (dB) (Min) DC-1 GHz 1.0-3.0 GHz 3.0-6.0 GHz |
80 70 60 |
80 70 60 |
80 70 60 |
80 70 60 |
Power Rating, RF Cold Switching: See this page Impedance: 50 Ohms Operating Power 25 C: (Failsafe): 12Vdc at 270 ma nom. 28Vdc at 190 ma nom. 115Vac at 50 ma nom. (Latching): 28 Vdc at 310 mA nom. 12 Vdc at 550 mA nom. Cutthroat circuitry (standard), recovery time 100ms nom. |
Connectors, Power: Feed through solder lugs. Connectors, RF: N, HN, SC, TNC Female (HN not recommended above 4GHz) Life: 1,000,000 operations. Switching Time: 20 mS Max. Failsafe, 125 ms latching. Environmental Conditions: MIL-S-3928 Operating Mode: Manual, failsafe or latching Switching Sequence: Break before make. |
To designate the switch desired use:
1: “M” for Manual, “R” for Remote. 2: “3”, “4”, “5” or “6” throw operation 3: “N”, “T” for TNC, “H” for HN or “S” for SC type connectors |
4: “A” for 115 Vac, “D” for 28 Vdc or “H” for 12 Vdc. 5: “I” for indicators if desired. 6: “L” for Latching cutthroat if desired 7: “TL” for TTL Driver if desired |
Example: SR-6-P-N-D-I-L is a remote, 6 position, N Connector, 28 Vdc; with indicators, latching cutthroat switch
Outline Drawing
SR-6-P-N-D-I-L, SM-6-P-N
