High Power Coaxial Switches
RLC Electronics’ High Power Coaxial Switch is a single pole, two position type providing extremely high reliability, long life and excellent electrical performance over the frequency range of DC-6 GHz. The switches will handle up to 5000 Watts at 100 MHz up to 700 Watts at 6 GHz. The switches utilize thermally conductive, dielectric insulators to allow high power handling capabilities. The package utilizes high density packaging techniques, volume of the switch is less than 6 cubic inches.
Specifications
S1–P-2–2–3–4–5–6
Switch Type |
SINGLE POLE TWO POSITION |
|
Frequency Range |
DC-6 GHz |
|
Insertion Loss (Max dB) |
DC-4.0 |
4.0-6.0 |
0.2 |
0.5 |
|
VSWR (Max) |
1.25 |
1.5 |
Isolation (dB) |
60 |
60 |
Power Rating, RF Cold Switching: See this page. Impedance: 50 Ohms. Operating Power 25C: (Failsafe): 12Vdc at 575 ma nom. 28Vdc at 200 ma nom. 115 Vac at 50 ma nom. (Latching):12 Vdc at 1 amp nom. 28 Vdc at 430 ma nom. 115 Vac at 50 ma nom. Current applied 10 ms min. cutthroat circuitry(standard), recovery time 100 ms nom. |
Connectors, RF:N, SC, HN, TNC, Female (HN not recommended for use above 4GHz) Connectors, Power: Feed through solder lugs. Life: 1,000,000 operations. Switching Time: 20 mS Max. Weight: 12 oz. Environmental Conditions: MIL-S-3928 Operating Mode: Manual, failsafe or latching. Switching Sequence: Break before make. |
To designate the Switch desired use:
1: “M” for Manual, “R” for Remote. |
4: “I” for indicators. |
|
2: “S” for SC, “H” for HN, “N” or “T” for TNC. |
5: “L” for latching cutthroat. |
|
3: “A” for 115 Vac, “D” for 28 Vdc or “H” for 12 Vdc. |
6: “TL” for TTL Driver. |
Example: SRP-2-S-D-I is a remote, SC Connectors, 28 Vdc; with indicators, Failsafe operation switch 50 ohms.
Outline Drawing
SRP-2-S-D-I, SMP-2-T
