Standard High Pass Filters
RLC Electronics’ High Pass Filters are designed for operation over the frequency range of 100 MHz to 18.0 GHz. Sharp rejection below the cutoff frequency is assured in the use of these filters. Low insertion loss and low VSWR in the pass band are accomplished by the utilization of impedance matching, transforming end sections, and a precise coaxial fabrication. Rugged light weight construction makes the units suitable for extreme environmental conditions.
Specifications
F–1–2–3
Model Number |
Pass Band (GHz) |
3 dB Point Typical (GHz) |
30 dB Point Typical (GHz) |
60 dB Point Stop Band (GHz) |
F-20-100- |
.1 -.20 |
.09 |
.07 |
DC -.05 |
F-20-200- |
.2 – .40 |
.18 |
.14 |
DC -.10 |
F-20-300- |
.3 – .60 |
.27 |
.21 |
DC -.15 |
F-20-400- |
.4 – .80 |
.36 |
.28 |
DC -.20 |
F-20-500- |
.5 – 1.00 |
.45 |
.35 |
DC -.25 |
F-20-600- |
.6 – 1.20 |
.54 |
.42 |
DC -.30 |
F-20-800- |
.8 – 1.60 |
.72 |
.60 |
DC -.40 |
F-20-1000- |
1.0 – 2.00 |
.90 |
.70 |
DC -.50 |
F-40-1.0- |
1.0 – 2.00 |
.90 |
.70 |
DC -.50 |
F-40-1.5- |
1.5 – 3.00 |
1.35 |
1.05 |
DC -.75 |
F-40-2.0 |
2.0 – 4.00 |
1.80 |
1.40 |
DC -1.00 |
F-40-3.0 |
3.0 – 6.00 |
2.70 |
2.10 |
DC -1.50 |
F-40-4.0 |
4.0 – 8.00 |
3.60 |
2.80 |
DC -2.00 |
F-40-5.0 |
5.0 – 10.00 |
4.50 |
3.50 |
DC -2.50 |
F-40-6.0 |
6.0 – 12.00 |
5.40 |
4.20 |
DC -3.00 |
F-40-8.0 |
8.0 – 16.00 |
7.20 |
5.60 |
DC -4.00 |
F-40-10.0 |
10.0 – 18.00 |
9.20 |
7.00 |
DC -5.00 |
Pass Band VSWR: 1.6:1 Pass Band Insertion Loss: F-20;0.7dB max. F-40;0.5dB max Power Rating(Average): F-20 – 25 Watts F-40 – 100 Watts Impedance: 50 Ohms Environmental: MIL-E-5400, Class 1A Connectors: (Male & Female) |
Type – Recommend Freq Range:
|
To designate the filter desired use:
1: “20” or “40” for model number 2: “100”, “200” etc for pass band |
3: “N” for type N, “B” for BNC, “T” for TNC or “R” for SMA connectors. Add “M” or “F” for both male or female. |
Example:F-40-10.0-R is a model 40, 10 to 18 GHz filter with type SMA (m/f) connectors.
Typical Operating Curves
Outline Drawing