Micro Miniature Band Pass Filters
RLC Electronics’ Micro Miniature Band-Pass Filters offer excellent frequency response characteristics with low insertion loss. The small size capability is provided by utilization of miniaturized high Q devices in a microstrip mode. Standard units utilize low ripple, Chebychev design. Other responses are available when desired.
Specifications
MBP–1–2–3–4
Model Number |
Center Frequency Range (MHz) |
3 dB Bandwidth (% of fc) |
Number of Sections |
Stopband Attenuation |
MBP |
10 to 500 |
2 to 70% |
2 to 8 |
See Curves on this page |
500 to 2500 |
2 to 50% |
|||
2500 to 12,400 |
2 to 25% |
VSWR: 1.5:1, Bandwidth: Curve 1,see this page Passband Insertion Loss (max at fc): See chart below Power Rating: 2 Watts 0.5 dB Bandwidth: Curve 2 on this page 1 dB Bandwidth: Curve 3 on this page |
Connectors: SMA Female, tabs or pins Impedance: 50 Ohms Phase Linearity: 5 deg. Curve 4 on this page Spurious: None to 2.8 x fc or 18 GHz whichever is less Environmental: MIL-E-5400, Class 1A |
To designate the filter desired use:
1: Center Frequency in MHz 2: 3dB bandwidth in MHz 3: Number of Sections |
4: Outline configurations: PB,TP,T8S,CB,RR,RA,CR,T8,PR (see this page for dimensions). |
Example: MBP-500-4-RA is a 500MHz center frequency 50 MHz 3 dB bandwidth, 4 section,
Micro Miniature Band Pass Filter with outline per configuration RA