Line Loss Equalizer
RLC Electronics’ line loss equalizers combine filter and attenuator technology for a flat overall response up to 18 GHz. When transmitting into a coax cable loss increases with frequency and cable length. This loss can become substantial when using broadband devices over long cable distances necessitating compensation to ensure a flat response. By linearly decreasing loss as frequency increases RLC’s line loss equalizers offer an effective solution to your line loss problem. With a minimum loss point as low as 1dB and wide variety of attenuation differentials you can compensate for a wide range of cable types and lengths
Specifications
LLE–1–2–3
Frequency Range |
VSWR |
Attenuation Differential |
Linearity |
Insertion Loss |
10 MHz to 5GHz |
1.5:1 |
Up to 20 dB from 1 to 3 octaves bandwidth |
+/- .5 dB |
As low as 1dB at Min loss point |
5 GHz to 18 GHz |
1.8:1 |
+/- .75 dB |
Impedance: 50 ohms |
Environment: Mil-E-5400, class 1A Except operating temperature -55 C to + 85 C |
To designate the filter desired use:
1: Lower frequency/upper frequency ( in MHz ) 2: Attenuation differential 3: Connectors: R for SMA, T for TNC, B for BNC, male/female |
Example: LLE-2000/4000-8-R is an equalizer with 8dB of difference in attenuation
between 2 and 4 GHz with SMA connectors.
Outline Drawing
(Typical outline-Please contact the factory for additional configurations)