High Power Low Pass Filters
RLC Electronics’ High Power Low Pass filters are designed for high power systems in the frequency range of 100 to 4000 MHz. Conservatively rated at 500W under extreme temperature and altitude conditions these filters have low VSWR and approximately 2/3rds the loss of our F-80 series. These filters offer you the flexibility of choosing your cutoff as well as the number of sections for a truly custom high power low pass product.
Specifications
LPP–1–2–3
Model |
Cut-Off Frequency Fc (MHz) |
Number Of Sections |
3dB Point (Typical) |
30dB Point (Typical) |
60dB Point (Min) |
LPP |
100 to 4000 |
2 |
1.4 |
2.5 |
5.2 |
3 |
1.15 |
1.7 |
2.8 |
||
4 |
1.09 |
1.4 |
2.0 |
||
5 |
1.07 |
1.26 |
1.62 |
||
6 |
1.05 |
1.18 |
1.44 |
||
7 |
1.04 |
1.14 |
1.33 |
||
8 |
1.04 |
1.11 |
1.26 |
Pass Band: DC to Fc Pass Band Insertion Loss: .06 dB per section Fc < 1000 MHz .05 dB per section Fc > 1000Mhz |
Pass Band VSWR: 1.25:1 (Max) Power: 500 Watts avg Connectors: Type N, SC, HN Environment: Mil-E-5400 |
To designate the filter desired use:
1: Cut-off Frequency in MHz 2: Number of sections |
3: Connector type. Add “M” or “F” for both male or female type male or female |
Example: LPP-452-6-NF is a 452 MHz cutoff, 6 section filter with type N female
connectors
Outline Drawing
