Custom High Frequency Lowpass Filters
RLC computerized Low Pass filters are available built to your specifications for both cut-off frequency and rejection regions. This series of filters have cut-off frequencies up to 50.5 GHz with as many as 10 sections. By varying the number of sections you have direct control of the cut-off frequency and the skirt selectivity. Advanced coaxial techniques and optimum selection of component materials ensure stability over temperature and a low VSWR over the entire passband.
Specifications
F-80–1–2–3
Model No. |
Cut-Off Frequency (MHz) |
Number of Sections |
3 dB Point (Typical) |
30 dB Point (Typical) |
60 dB Point (min) |
F-80 |
26000 to 50500 |
2 |
1.4 fc |
2.5 fc |
5.2 fc |
3 |
1.15 fc |
1.7 fc |
2.8 fc |
||
4 |
1.09 fc |
1.4 fc |
2.0 fc |
||
5 |
1.07 fc |
1.26 fc |
1.62 fc |
||
6 |
1.05 fc |
1.18 fc |
1.44 fc |
||
7 |
1.04 fc |
1.14 fc |
1.33 fc |
||
8 |
1.04 fc |
1.11 fc |
1.26 fc |
||
9 |
1.03 fc |
1.08 fc |
1.19 fc |
||
10 |
1.02 fc |
1.06 fc |
1.14 fc |
Pass Band: |
DC to fc |
Impedance: |
50 ohms |
|
Pass Band Ins Loss: |
0.12dB/section up to 40 GHz 0.18dB/section up to 50.5 GHz |
Environmental: |
MIL-E-5400, Class 1A |
|
Pass Band VSWR: |
1.8:1 up to 40GHz 2.0:1 up to 50.5GHz |
Connector Types: |
2.92 mm up to 40Hz 2.4 mm or 1.85 mm up to 50.5 GHz |
To designate the Filter desired use:
(1) Cut-off frequency in MHz |
(2) Number of Sections |
|
(3) Connector “2.92”,”2.4″ or 1.85 Add “M” or “F” for both male or female |
Example: F-80-42000-6-2.4 is a 42000 MHz cut-off, 6 sections with
2.4 mm M/F connectors