Cavity, Comb Line and Interdigital Band Pass Filters
RLC Electronics’ Cavity, Comb Line and Interdigital Band PassFilters are fixed tuned filters that feature sharp stop band rejection and lower losses that comparable tubular band pass filters.Parallel coupled round rod distributed resonators afford small size and high Q to achieve a near ideal bandpass response. Units are constructed to operate over the most severe military environmental conditions. Integral Low Pass Filters are available to extend the stopband to as high as 40 GHz. The type of filter selected is usually determined by the percentage 3 dB band-width desired.
Specifications
Model Number 1–2–3–4
Filter Type |
Model Number |
Center Frequency Range (MHz) |
3 dB Bandwidth (% of fc) |
Number of Sections |
Stopband Attenuation |
Cavity |
CBPF |
500 to 26000 |
0.2 to 3.0 |
2 to 14 |
See Curves on this page |
Comb Line |
CF |
500 to 36000 |
3.0 to 25.0 |
2 to 14 |
|
Interdigital |
IBPF |
1000 to 26000 |
25.0 to 67.0 |
3 to 15 |
Insertion Loss(max at fc): Curve 1, see this page. *VSWR: 1.5:1, Bandwidth: Curve 1, see this page *For no. of sections <= 8, VSWR is 1.5:1 For N=9 to 11, VSWR is 1.5:1 to 10 GHz, above 10GHz VSWR = 1.5+0.07(N-8) For N=12 to 15, VSWR is 1.5:1 to 7 GHz, above 7 GHz, VSWR is 1.6+0.1(N-11) Power Rating: IBPF 100 watts CF and CBPF 15 watts Impedance: 50 Ohms Environmental: MIL-E-5400, Class 1A |
0.5 dB Bandwidth: Curve 2, see this page 1 dB Bandwidth: Curve 3, see this page Phase Linearity: 5 deg. Curve 4, see this page Connectors (female): Type Recommended Freq Rng (MHz) BNC DC-1,000 N DC-12,400 TNC DC-15,000 SMA DC-26,000 K DC-40,000 |
To designate the filter desired use:
1: Center frequency in MHz 2: 3dB bandwidth in MHz 3: Number of sections |
4: “N” for type N, “B” for BNC, “T” for TNC, “R” for SMA (female) “K” for 2.92mm (female) |
Example: IBPF-3500-1000-10-R is a 3500 MHz center frequency, 1000 MHz 3 dB BW, 10 section filter with SMA(female) connectors.
Outline Drawings
CenterFrequency(MHz) |
Approximate Dimension Table |
|||
W IBPF |
W CBPF,CF |
H |
L (N is the number of sections) |
|
501-800 |
2950 |
3.75 |
1.19 |
1.125xN+.625 |
801-2000 |
2.25 |
1 |
3.75 for N=2 N+.75 for N>2 |
|
2001-4000 |
1.38 |
.75 |
2.50 for N=2 .625xN+.625 for N>2 |
|
4001-8000 |
.94 |
.63 |
2.00 for N=2 .50xN+.5 for N>2 |
|
8001-12000 |
.75 |
.56 |
1.50 for N=2, 2.00 for N=3 2.50 for N=4 or 5, 3.00 for N=6 3.50 for N=7 or 8 |
|
12001-20000 |
.70 |
.53 |
1.75 for N=2 to 4 2.38 for N=5 or 6 3.00 for N=7 or 8 |
|
20001-36000 |
.53 |
.38 |
CONNECTORS |
R |
N |
T/B |
“C” Dimension |
.30 |
.60 |
.52 |