2 Way Resistive Power Dividers
RLC Electronics’ broadband resistive power dividers are small and lightweight with stainless steel `SMA’ connectors. They have excellent stability over temperature and output power, symmetry over frequency with a division of 6dB from matched ports. Input and outputs are interchangeable and phase difference is nominally 2.5 Degrees between output ports. These dividers utilize 3 resistors to provide excellent output VSWR at the auxiliary arms over the full frequency range enabling wideband measurements to be made accurately.
Specifications
DR–1–2–3
Model Number |
Frequency Range (GHz) |
Insertion Loss Isolation |
VSWR |
Amplitude |
DR |
DC-4.0 |
6.5 dB |
1.2:1 |
.2 dB |
4.0-10.0 |
7.0 dB |
1.3:1 |
.4 dB |
|
10.0-18.0 |
7.3 dB |
1.4:1 |
.5 dB |
Frequency: DC 18GHz Impedance: 50 ohms Power rating: 1 watt |
Connectors: `SMA’ (male or female) Environment: MILE5400, Class 1A |
To designate the power divider desired use:
1: PORT 1 connector add M for male or F for female. 2: PORT 2 connector add M for male or F for female. |
3: PORT 3 connector add M for male or F for female. NOTE: Refer to outline drawing below for connector location & orientation |
Example: DRFFM is a DC to 18GHz resistive power divider w/port 1 (female), port 2 (female), port 3 (male)
Outline Drawing
