Type C Transfer Coaxial Switch
This RLC Electronics’ Type C C mid-size Transfer Switch provides extremely high reliability, long outstanding electrical performance and features extremely low insertion loss and VSWR over the entire DC-18 GHz range, with option to 26 and 40 GHz,maintaining high isolation.
Specifications
S-1-TC–2–3–4–5–6–7
Switch Type: |
TRANSFER |
|||
Frequency Range: |
DC-18 GHz |
(Opt. 26) |
DC-40 GHz (Opt. 40) |
|
Insertion Loss (Max dB) |
Ins. Loss: (dB Max) |
|||
DC-4.0 GHz 4.0-12.4 GHz 12.4-18 GHz 18-26.5 GHz (option 26) |
0.20 0.30 0.40 - |
0.20 0.30 0.40 0.70 |
DC-6.0 GHz 6.0-12 GHz 12-18.5 GHz 18.5-26.5 GHz 26.5-40 GHz |
0.25 0.40 0.50 0.70 0.90 |
VSWR (Max) |
VSWR: (Max) |
|||
DC-4 GHz 4.0-12.4 GHz 12.4-18 GHz 18-26.5 GHz (option) |
1.20 1.30 1.50 – |
1.20 1.30 1.50 1.80 |
DC-6.0 GHz 6.0-12 GHz 12-18.5 GHz 18.5-26.5 GHz 26.5-40 GHz |
1.30 1.40 1.50 1.70 2.00 |
Isolation (dB Min) |
Isolation: (dB Min) |
|||
DC-4 GHz 4.0-12.4 GHz 12.4-18 GHz 18-26.5 GHz (option) |
80 70 60 - |
80 70 60 40 |
DC-6.0 GHz 6.0-12 GHz 12-18.5 GHz 18.5-26.5 GHz 26.5-40 GHz |
70 60 60 55 45 |
Power Rating, RF Cold Switching: see this page Impedance: 50 Ohms Operating Power 25C (Failsafe): 12Vdc at 500 ma nom. 28Vdc at 200 ma nom. 115 Vac at 40 ma nom. (Latching): 12 Vdc at 500 ma nom. 28 Vdc at 300 ma nom. 115 Vac at 225 ma nom. Current applied cutthroat circuitry(standard), recovery time 100ms nom. Connectors, RF: SMA, TNC*, BNC* (40 GHz 2.92 mm) |
Connectors, Power: Feed through solder lugs. Life: 1,000,000 operations. Switching Time: 20 20 mS Max. Weight: 6 oz. Environmental Conditions: MIL-DTL-3928 Operating Mode: Manual, failsafe or latching. Switching Sequence: Break before make. *BNC not recommended above 1GHz *TNC not recommended above 12.4GHz |
To designate the switch desired use:
1: “M” for Manual, “R” for Remote. 2: “B” for BNC, “T” for TNC, “R” for SMA type connectors 3: “A” for 115 Vac, “D” for 28 Vdc or “H” for 12 Vdc. 4: “I” for indicators if desired. |
5: “L” for latching cutthroat if desired 6: “TL” for TTL Driver if desired 7: “26” for 26.5GHz option “40” for 40 GHz option |
Example: SR-TC-T-D-I-L is a remote, TNC, 28 Vdc; with indicators, latching cutthroat switch
Outline Drawing
SR-TC-T-D-I-L, SM-TC-T
