Micro Miniature and Surface Mount Low Pass Filters
RLC Electronics’ Micro Miniature Low Pass Filters utilize proprietary dielectric materials and manufacturing techniques to achieve performance rivaling much larger devices. Standard units are 0.05dB Chebychev design. Other responses can be manufactured when desired.
Specifications
MLP–1–2–3
SMLP–1–2–3 (Surface–Mount)
Number Model |
Cut-Off Frequency fc (MHz) |
Number of Sections |
Typical 20 dB Point |
Typical 30 dB Point |
Typical 40 dB Point |
Typical 50 dB Point |
Minimum 60 dB Point |
MLP |
10 to 2000 |
3* |
1.36 fc |
1.52 fc |
1.73 fc |
1.98 fc |
2.30 fc |
4* |
1.21 fc |
1.31 fc |
1.43 fc |
1.57 fc |
1.73 fc |
||
5* |
1.16 fc |
1.22 fc |
1.29 fc |
1.37 fc |
1.48 fc |
||
6 |
1.11 fc |
1.16 fc |
1.21 fc |
1.26 fc |
1.34 fc |
||
7 |
1.09 fc |
1.12 fc |
1.16 fc |
1.20 fc |
1.26 fc |
||
8 |
1.07 fc |
1.10 fc |
1.13 fc |
1.16 fc |
1.20 fc |
3dB Passband: DC to fc Insertion Loss: DC to 90% of fc per curve Impedance: 50 Ohms Environmental: MIL-E-5400, Class 1A |
Power Rating: 2 Watts VSWR: 1.5:1 to 90% of fc Stopband Attenuation: Per above table min. |
* SMLP series limited to 5 sections max.
To designate the filter desired use:
1: Cut-off Frequency in MHz 2: Number of Sections |
3: Outline configurations: CB, C1, C2, T8S for SMLP series), RA, CR, PR, TP (for MLP series). See this page for dimensions. |
Examples:
MLP-2000-6-RA is a microminiature lowpass filter with a 3dB cut-off of 2000 MHz,
6 sections and per outline configuration RA.
SMLP-1500-5-CB is a surface mount low pass filter with a 3dB cut-off of 1500 MHz,
5 sections and per outline configuration CB.
Insertion Loss Curve
